Skip to main content

PackageVersionsQuery

Struct PackageVersionsQuery 

Source
pub struct PackageVersionsQuery {
    pub versions: Range<u64>,
    pub descending: bool,
    /* private fields */
}
Expand description

The versions a ListPackageVersions request lists and how its response pages: the request’s version bounds, checkpoint range, page token, and cursors intersected into one version range, validated against the lineage being listed. Public so other implementors of MovePackageService parse requests and page responses the same way.

A lineage’s versions are published in non-decreasing checkpoint order, so the checkpoint range is one version range: start_checkpoint starts it just above the lineage’s newest version at the end of the checkpoint before it (Self::bound_by_start_checkpoint), and the listing holds no version published after Self::bounding_checkpoint. Both read the lineage as of a checkpoint, as a read pinned by at_checkpoint does.

Fields§

§versions: Range<u64>

The versions to list. An end of u64::MAX leaves the range unbounded above, since no version reaches it.

§descending: bool

Whether to list versions from highest to lowest.

Implementations§

Source§

impl PackageVersionsQuery

Source

pub fn new( request: &ListPackageVersionsRequest, original_package_id: ObjectID, highest_indexed: u64, ) -> Result<Self>

Parse the paging of request, which lists the upgrade lineage of the package originally published at original_package_id, on a server that has indexed every checkpoint up to highest_indexed, and check that its page token or cursors name that lineage. The request is validated with validate_request here as well, but callers run it first, so that a malformed request is refused before check_checkpoint_range and any read.

Source

pub fn read_limit(&self) -> usize

The most versions to read for one response: a full page, plus in page-token mode the first version of the next page, which the next page token points at.

Source

pub fn is_cursor_mode(&self) -> bool

Whether the request pages by cursor, rather than by page token.

Source

pub fn is_first_page(&self) -> bool

Whether the request starts a listing, rather than continuing one from a page token or cursor.

Source

pub fn empty_range_end(&self) -> Option<QueryEndReason>

How the listing ends when its checkpoint range alone leaves nothing to list, before any read, as ListTransactions ends such a range: an ascending listing whose start_checkpoint is above the highest indexed checkpoint starts past the tip, with LEDGER_TIP, and an empty range (end_checkpoint equal to start_checkpoint, or 0 when that is unset) ends where it starts, with CHECKPOINT_BOUND.

Source

pub fn start_checkpoint_lookup(&self) -> Option<u64>

The checkpoint whose version starts the range: the one before start_checkpoint. None when start_checkpoint is unset or 0, which leave the range’s start as it is.

Source

pub fn bound_by_start_checkpoint(&mut self, newest_before_start: Option<u64>)

Start the range just above newest_before_start, the lineage’s newest version at the end of Self::start_checkpoint_lookup, or leave it if the lineage had none by then. Every version published at or after start_checkpoint is above it, since a lineage’s versions are published in non-decreasing checkpoint order.

Source

pub fn bounding_checkpoint(&self) -> u64

The checkpoint that bounds the listing: end_checkpoint - 1 when the server has indexed it, else the highest indexed checkpoint. The listing holds no version published after it. Not meaningful when Self::empty_range_end is set.

Source

pub fn continues_listing(&self) -> bool

Whether the request continues a listing whose client holds the version just below Self::versions: an after cursor names it, in either order, or a page token names the version above it, and no start_version or start_checkpoint above either bounds the range. Versions below OBJECT_START_VERSION are left out: no lineage has one, so a client holds none. A server that lists only the versions it retains refuses such a request when the range starts below the lowest version it retains: starting at that version instead would skip the versions in between without saying so.

Source

pub fn cursor_versions(&self) -> impl Iterator<Item = u64>

The versions named by the request’s cursors that the server checks against its tip: those of a descending listing whose range reaches past the tip. A cursor naming a version above every version the server serves comes from a newer view of the lineage, such as another replica’s, and a descending page from this server’s view would start below versions it lacks, skipping them without saying so. The server rejects it with crate::AtCheckpointUpperBound::unindexed_cursor_error.

An ascending listing serves cursors past the tip from its own view, ending with LEDGER_TIP (see Self::end_reason), and a descending listing whose end_checkpoint the server has indexed holds no version above end_checkpoint - 1. A legacy page token past the tip gets an empty page with no next_page_token, as from servers that predate cursor paging. A named version below where the server’s history of the lineage begins, such as an old version of a system package on a node restored from a snapshot, is not rejected here: see Self::continues_listing. Versions below OBJECT_START_VERSION are left out: no lineage has one, so a cursor naming one skips nothing.

Source

pub fn listed_version( &self, storage_id: ObjectID, version: u64, checkpoint: Option<u64>, ) -> PackageVersion

One listed version. In cursor mode it carries its cursor, minted at the highest indexed checkpoint; a page-token listing’s versions carry none, as on servers that predate cursor paging.

Source

pub fn needs_end_reason(&self, listed: usize) -> bool

Whether a response listing listed versions ends with Self::end_reason: a page in cursor mode with fewer than the limit. A full page ends with ITEM_LIMIT.

Source

pub fn end_reason(&self, visible_end: u64) -> QueryEndReason

How a listing that read Self::versions to the end ends, given visible_end, the version after the lineage’s newest one at the end of Self::bounding_checkpoint (0 if it had none), named as ListObjectVersions and the ledger List APIs name it:

  • An ascending listing whose window reaches past the lineage’s newest version ends with LEDGER_TIP, since versions published later extend it: its end_checkpoint is unset or above the checkpoint after the highest indexed one, and end_version is unset or above both the version after the newest one and the window’s start. So does one whose after cursor is past the tip, which lists nothing, unless a tighter bound leaves nothing above after, as ListObjectVersions decides it: before at or below the version after after, and at or below end_version, ends it with CURSOR_BOUND, and otherwise end_version at or below that version ends it with CHECKPOINT_BOUND.
  • Otherwise the far cursor in listing order ends it with CURSOR_BOUND when the version it names is inside the window the request’s version and checkpoint bounds set, or at its edge: before at or below the window’s end ascending, after at or above its start descending.
  • Every other listing ends at the edge of that window, with CHECKPOINT_BOUND. On a server that prunes history, so does a descending listing that stops at the oldest version it stores.
Source

pub fn response( &self, versions: Vec<PackageVersion>, end: Option<QueryEndReason>, ) -> ListPackageVersionsResponse

The response listing versions: at most Self::read_limit versions, read in this query’s order. In cursor mode, it ends with end, the Self::end_reason of a page that Self::needs_end_reason, or else with ITEM_LIMIT.

Trait Implementations§

Source§

impl Clone for PackageVersionsQuery

Source§

fn clone(&self) -> PackageVersionsQuery

Returns a duplicate of the value. Read more
1.0.0 (const: unstable) · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for PackageVersionsQuery

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
§

impl<T> Any for T
where T: Any,

§

fn into_any(self: Box<T>) -> Box<dyn Any>

§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

§

fn type_name(&self) -> &'static str

§

impl<T> AnySync for T
where T: Any + Send + Sync,

§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Send + Sync> ⓘ

§

impl<U> As for U

§

fn as_<T>(self) -> T
where T: CastFrom<U>, U: Sized,

Casts self to type T. The semantics of numeric casting with the as operator are followed, so <T as As>::as_::<U> can be used in the same way as T as U for numeric conversions. Read more
§

impl<'a, T, E> AsTaggedExplicit<'a, E> for T
where T: 'a,

§

fn explicit(self, class: Class, tag: u32) -> TaggedParser<'a, Explicit, Self, E>

§

impl<'a, T, E> AsTaggedImplicit<'a, E> for T
where T: 'a,

§

fn implicit( self, class: Class, constructed: bool, tag: u32, ) -> TaggedParser<'a, Implicit, Self, E>

Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
Source§

impl<T> DynClone for T
where T: Clone,

Source§

fn __clone_box(&self, _: Private) -> *mut ()

§

impl<T> ErasedDestructor for T
where T: 'static,

§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> FromRef<T> for T
where T: Clone,

§

fn from_ref(input: &T) -> T

Converts to this type from a reference to the input type.
§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T> IntoRequest<T> for T

§

fn into_request(self) -> Request<T>

Wrap the input message T in a Request
§

impl<T> IntoRequest<T> for T

§

fn into_request(self) -> Request<T>

Wrap the input message T in a tonic::Request
§

impl<L> LayerExt<L> for L

§

fn named_layer<S>(&self, service: S) -> Layered<<L as Layer<S>>::Service, S>
where L: Layer<S>,

Applies the layer to a service and wraps it in [Layered].
§

impl<T> MaybeSendSync for T

§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> PolicyExt for T
where T: ?Sized,

§

fn and<P, B, E>(self, other: P) -> And<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] only if self and other return Action::Follow. Read more
§

fn or<P, B, E>(self, other: P) -> Or<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] if either self or other returns Action::Follow. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
§

impl<T> ServiceExt for T

§

fn propagate_header(self, header: HeaderName) -> PropagateHeader<Self>
where Self: Sized,

Propagate a header from the request to the response. Read more
§

fn add_extension<T>(self, value: T) -> AddExtension<Self, T>
where Self: Sized,

Add some shareable value to request extensions. Read more
§

fn map_request_body<F>(self, f: F) -> MapRequestBody<Self, F>
where Self: Sized,

Apply a transformation to the request body. Read more
§

fn map_response_body<F>(self, f: F) -> MapResponseBody<Self, F>
where Self: Sized,

Apply a transformation to the response body. Read more
§

fn compression(self) -> Compression<Self>
where Self: Sized,

Compresses response bodies. Read more
§

fn decompression(self) -> Decompression<Self>
where Self: Sized,

Decompress response bodies. Read more
§

fn trace_for_http(self) -> Trace<Self, SharedClassifier<ServerErrorsAsFailures>>
where Self: Sized,

High level tracing that classifies responses using HTTP status codes. Read more
§

fn trace_for_grpc(self) -> Trace<Self, SharedClassifier<GrpcErrorsAsFailures>>
where Self: Sized,

High level tracing that classifies responses using gRPC headers. Read more
§

fn follow_redirects(self) -> FollowRedirect<Self>
where Self: Sized,

Follow redirect resposes using the Standard policy. Read more
§

fn sensitive_headers( self, headers: impl IntoIterator<Item = HeaderName>, ) -> SetSensitiveRequestHeaders<SetSensitiveResponseHeaders<Self>>
where Self: Sized,

Mark headers as sensitive on both requests and responses. Read more
§

fn sensitive_request_headers( self, headers: impl IntoIterator<Item = HeaderName>, ) -> SetSensitiveRequestHeaders<Self>
where Self: Sized,

Mark headers as sensitive on requests. Read more
§

fn sensitive_response_headers( self, headers: impl IntoIterator<Item = HeaderName>, ) -> SetSensitiveResponseHeaders<Self>
where Self: Sized,

Mark headers as sensitive on responses. Read more
§

fn override_request_header<M>( self, header_name: HeaderName, make: M, ) -> SetRequestHeader<Self, M>
where Self: Sized,

Insert a header into the request. Read more
§

fn append_request_header<M>( self, header_name: HeaderName, make: M, ) -> SetRequestHeader<Self, M>
where Self: Sized,

Append a header into the request. Read more
§

fn insert_request_header_if_not_present<M>( self, header_name: HeaderName, make: M, ) -> SetRequestHeader<Self, M>
where Self: Sized,

Insert a header into the request, if the header is not already present. Read more
§

fn override_response_header<M>( self, header_name: HeaderName, make: M, ) -> SetResponseHeader<Self, M>
where Self: Sized,

Insert a header into the response. Read more
§

fn append_response_header<M>( self, header_name: HeaderName, make: M, ) -> SetResponseHeader<Self, M>
where Self: Sized,

Append a header into the response. Read more
§

fn insert_response_header_if_not_present<M>( self, header_name: HeaderName, make: M, ) -> SetResponseHeader<Self, M>
where Self: Sized,

Insert a header into the response, if the header is not already present. Read more
§

fn set_request_id<M>( self, header_name: HeaderName, make_request_id: M, ) -> SetRequestId<Self, M>
where Self: Sized, M: MakeRequestId,

Add request id header and extension. Read more
§

fn set_x_request_id<M>(self, make_request_id: M) -> SetRequestId<Self, M>
where Self: Sized, M: MakeRequestId,

Add request id header and extension, using x-request-id as the header name. Read more
§

fn propagate_request_id( self, header_name: HeaderName, ) -> PropagateRequestId<Self>
where Self: Sized,

Propgate request ids from requests to responses. Read more
§

fn propagate_x_request_id(self) -> PropagateRequestId<Self>
where Self: Sized,

Propgate request ids from requests to responses, using x-request-id as the header name. Read more
§

fn catch_panic(self) -> CatchPanic<Self, DefaultResponseForPanic>
where Self: Sized,

Catch panics and convert them into 500 Internal Server responses. Read more
§

fn request_body_limit(self, limit: usize) -> RequestBodyLimit<Self>
where Self: Sized,

Intercept requests with over-sized payloads and convert them into 413 Payload Too Large responses. Read more
§

fn trim_trailing_slash(self) -> NormalizePath<Self>
where Self: Sized,

Remove trailing slashes from paths. Read more
§

fn append_trailing_slash(self) -> NormalizePath<Self>
where Self: Sized,

Append trailing slash to paths. Read more
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
§

impl<T> ToAst for T

§

fn ast(self, begin: usize, end: usize) -> Spanned<Self>

Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more