pub struct AuthenticatedEventsConfig {
pub stream_id: Address,
pub start_checkpoint: Option<u64>,
pub page_size: u32,
pub channel_capacity: usize,
pub max_connect_retries: u32,
pub retry_backoff: Duration,
pub retry_jitter: Duration,
pub head_check_interval: Duration,
}unstable only.Expand description
Configuration for super::AuthenticatedEventsClient.
All fields are public so callers can construct one inline. The defaults match the upstream reference client’s choices unless noted otherwise.
Fields§
§stream_id: AddressThe stream id (a Sui address, typically the publishing package’s id) to subscribe to.
start_checkpoint: Option<u64>First checkpoint to read from. None means “start from the
network’s current tip at construction time”.
page_size: u32Maximum number of events to request per ListEvents page. The
server clamps to 1000 per the v2alpha contract.
channel_capacity: usizeBuffer capacity of the mpsc channel between the streaming task and the consumer. Larger values smooth over bursts; smaller values apply more backpressure to the producer.
max_connect_retries: u32Maximum number of consecutive RPC errors to tolerate before the streaming task gives up and aborts the stream with the last error.
retry_backoff: DurationBase backoff between RPC retry attempts. Each subsequent attempt
waits an additional retry_backoff.
retry_jitter: DurationUpper bound on random jitter added to each retry sleep, to avoid thundering-herd reconnects when multiple consumers see the same failure mode.
head_check_interval: DurationCadence at which the streaming task fetches the on-chain
EventStreamHead and reconciles it against the locally
replayed MMR. Smaller values release events to the consumer
faster at the cost of more OCS inclusion-proof round trips.
Implementations§
Trait Implementations§
Source§impl Clone for AuthenticatedEventsConfig
impl Clone for AuthenticatedEventsConfig
Source§fn clone(&self) -> AuthenticatedEventsConfig
fn clone(&self) -> AuthenticatedEventsConfig
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for AuthenticatedEventsConfig
impl RefUnwindSafe for AuthenticatedEventsConfig
impl Send for AuthenticatedEventsConfig
impl Sync for AuthenticatedEventsConfig
impl Unpin for AuthenticatedEventsConfig
impl UnsafeUnpin for AuthenticatedEventsConfig
impl UnwindSafe for AuthenticatedEventsConfig
Blanket Implementations§
§impl<U> As for U
impl<U> As for U
§fn as_<T>(self) -> Twhere
T: CastFrom<U>,
fn as_<T>(self) -> Twhere
T: CastFrom<U>,
self to type T. The semantics of numeric casting with the as operator are followed, so <T as As>::as_::<U> can be used in the same way as T as U for numeric conversions. Read moreSource§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
§impl<T> Conv for T
impl<T> Conv for T
§impl<T> Instrument for T
impl<T> Instrument for T
§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read more§impl<T> IntoRequest<T> for T
impl<T> IntoRequest<T> for T
§fn into_request(self) -> Request<T>
fn into_request(self) -> Request<T>
T in a tonic::Request§impl<L> LayerExt<L> for L
impl<L> LayerExt<L> for L
§fn named_layer<S>(&self, service: S) -> Layered<<L as Layer<S>>::Service, S>where
L: Layer<S>,
fn named_layer<S>(&self, service: S) -> Layered<<L as Layer<S>>::Service, S>where
L: Layer<S>,
Layered].§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere
T: ?Sized,
§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
self and passes that borrow into the pipe function. Read more§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
self and passes that borrow into the pipe function. Read more§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R,
) -> R
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
self, then passes self.as_ref() into the pipe function.§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
self, then passes self.as_mut() into the pipe
function.§fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
self, then passes self.deref() into the pipe function.§impl<T> PolicyExt for Twhere
T: ?Sized,
impl<T> PolicyExt for Twhere
T: ?Sized,
§impl<T> Tap for T
impl<T> Tap for T
§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
Borrow<B> of a value. Read more§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
BorrowMut<B> of a value. Read more§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
AsRef<R> view of a value. Read more§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
AsMut<R> view of a value. Read more§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
Deref::Target of a value. Read more§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
Deref::Target of a value. Read more§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
.tap() only in debug builds, and is erased in release builds.§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
.tap_mut() only in debug builds, and is erased in release
builds.§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
.tap_borrow() only in debug builds, and is erased in release
builds.§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
.tap_borrow_mut() only in debug builds, and is erased in release
builds.§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
.tap_ref() only in debug builds, and is erased in release
builds.§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
.tap_ref_mut() only in debug builds, and is erased in release
builds.§fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
.tap_deref() only in debug builds, and is erased in release
builds.